Unlike a basic hand-operated saw that features only a handle and a serrated blade, a good chainsaw needs more regular care. Taking good care of your chainsaw will maintain performance, help it perform more safely, and extend the life of your saw.
Following daily, weekly, and monthly maintenance routines will ensure you’re not missing anything important.
Everyday Maintenance Tips
- Check the Trigger
Check your throttle trigger before each use to ensure it’s working easily. On the off chance that the throttle trigger is sticking or the motor isn’t coming back to rest after you discharge the trigger, take the saw into a service center for inspection.
- Monitor Safety Features
For example, any safety features, the throttle trigger lockout, and the chain brake should be checked. Keep the chain brake clean, and check the chain catcher for harm. If it’s harmed, replace it right away.
- Keep a Clean Filter
Check your saw’s air channel before each use. On the off chance that it’s messy, clear it off and allow it to dry before reinserting it into the saw. If it’s damaged or filthy, replace it with a new filter.
- Rotate the Bar
For more even wear on the chainsaw bar, turn the bar before each use. Clean out the bar groove to prevent excessive wear, and inspect the lubrication hole to ensure it’s not clogged with anything. Not getting enough lubrication will cause more friction and damage to the bar and the chain.
- Check the Sprocket/Tighten and Sharpen the Chain
Inspect the drive sprocket for wear. On the off chance that it’s recognizably worn, replace it. Sharpen your chain, Inspect its condition, and replace it whenever harmed. Check the chain pressure to ensure it’s not very free, and fix it if essential. While sharpening, refer to your owner’s manual to determine what size file to use for your chain.
- Ruin Your Starter
Search for harm or unreasonable wear to the starter and the starter line. On the off chance that at all harmed, have it overhauled. Clean the air admission spaces situated on the starter lodging. Test the crisis stop change to guarantee it works appropriately. The motor should stop right away.
- Fix Any Loose Parts
With the vibration made by the motor, a few screws, nuts, or fasteners may shake free. Assess your saw for free parts before each use and fix them.
Week By Week Maintenance Tips
- Check Anti-Vibration Wear and Tear
Please look at the anti-vibration elements to make sure they’re not getting too soft or torn.
- Lube the Clutch
Lubricate the clutch drum bearings. This will prolong the life and performance of your clutch.
- Inspect the Bar
Remove your saw’s chain and run your finger around the edge of the chainsaw bar to feel for burrs. If you locate any, file them until they’re gone.
- Check Your Plugs
Remove and clean your spark plug, and ensure that the spark plug gap is still 0.5 mm. If necessary, replace the spark plug with a new one.
- Study Your Starter
Clean the flywheel fins, and make sure the recoil spring is functioning properly.
- Wipe Your Fins
Better you clean off the cooling fins that are located on the cylinder to ensure proper heat distribution and cooling.
- Clean the Carburetor
Always ensure to clean your carburetor and your airbox. Check the screen in your saw’s muffler. Clean it off or replace it as necessary.
Month To Month Maintenance Tips
- Check the Chain Brake Band
Remove the plastic cover to the bar and chain, and inspect the chain brake band. This is the thin metal band that wraps in a circle around your clutch drum. Ensure there are no cracks or visible weak spots on the band, especially where it attaches to the mechanisms near the front of the saw. If the brake band breaks, you’ll need to replace it.
- Check the Clutch
While you, despite everything, have the spread off, assess the grasp. Examine for wear on the focal point of the grasp, the grip drum, and the spring.
- Look at Your Fuel Filter
Check your fuel channel, and clean it or replace it as essential. Wipe off the outside of your carburetor.
- Overview Your Wiring
Check the entirety of your wiring, links, fittings, and whatever else you can access to ensure everything’s associated appropriately.
- Clean Your Tanks
Presently is additionally a decent ideal opportunity to clean within your fuel tank. Old fuel can leave a gunky buildup that is awful for your motor. You can likewise pause for a minute to clean your oil tank if you’d like.