This post is about – How to Cut and Remove a Tree Stump with a Chainsaw in your yard rapidly and safely. It can be an arduous and grueling task to remove a tree stump. But it is also one task that absolutely must be done if you want your yard to look its best.
There is nothing uglier than the remaining parts of a tree trunk, that giant stump gazing you directly in the face, where a beautiful tree used to be. So if you’ve been thinking about using a chainsaw for a tree stump removal, we’ve got some simple step by step instructions for you.
What are those Tree Stumps doing there in the First Place?
Anyone who owns an older house knows how bad trees can get after a while. Sure, they’re small and easy to manage in the beginning, but after a couple of years or so, they begin to overtake the entire yard. At times they even start to become a source of danger.
What’s more, in the long run, they can even reason extreme harm to your home (or even relatives) on the off chance that you don’t deal with the issue before it is past the point of no return.
That is why people end up cutting down the branches that hang over the house. But if the tree itself is what’s dangerous, many folks opt to cut the entire tree down. Hence the new stumps.
It requires a great deal of work, and thus, as a rule, people don’t remove the entire tree. Instead, just chopping to the ground, or much more terrible, a couple of feet above it. It results in the tree’s continual growth and the ugly tree stump sitting in your yard.
Step by step instructions to Remove a Tree Stump Without a Grinder
This article will give you the means to remove a tree stump without a grinder and save you the $100-$200 fees to have somebody come out and remove the stump for you.
Tools Needed To Remove Tree Stumps
There are several ways to clear those stumps, yet just one way gets them out rapidly. Assuming that you have, at the very least, read the title of our post, you should already know what technique I’m talking about: The chainsaw. You should have on hand a few other things before starting the process of removing a tree stump with your chainsaw.
Tools you will require:
- Safety gear
- Digging bars (these act as levers to remove the stump)
- An Ax – To cut hard to reach roots.
How To Remove a Stump with a Chainsaw
Stage 1: Put On Your Personal Protective Equipment
It is a straightforward advance, yet it is by a long shot the most significant one; regardless of whether you are a chainsaw veteran, the risks in working them never disappear. The hazards of chainsaws are plentiful; chains can break and hit the user or anybody around them.
Did you realize that generally, 40% of the chainsaw mishaps happen in the leg zone? Another 35% occur in the hands and wrists. It joined with how all the chainsaw wounds together come out to $350 million every year should disclose to all of you have to think about how significant safety is when using a chainsaw.
Stage 2: Cut the Stump as Low to the ground as could reasonably be expected
Cutting the stump low enough to the ground shouldn’t be too difficult of a task to accomplish. Make sure you get all of the branches off also. The lower to the ground, you can get the stump, the better. Now you can remove the tree roots from the rest of the stump.
In the subsequent stage, you will need to pry it out of the ground. The less measure of tree staying to work with, the simpler it will remove the stump.
When cutting the stump to the ground, make a point to apply the perfect weight measure with the chainsaw. Apply too little weight, and you’ll never get past the tree and wind up ruining the blade. Also, applying too much pressure can bind the chainsaw blade or kick-back, possibly injuring the injury. Keep firm pressure, and move slowly.
Stage 3: Shovel Dirt Away From the Stump
This step is meant to expose the roots of the tree stump. It’s a long and labor-intensive process (just like every other step in stump removal), but it is essential.
While doing this, you will need all of the roots uncovered; this will most likely expect you to dig a few feet from the tree and as much as 2-feet under the ground, which is why this is such a labor-intensive step. I’d probably dedicate an entire day for stage three. Unless you’ve got extra hands helping you out.
Stage 4: Cut the Roots
The fourth step is the reason the third step is so significant. Cutting the roots isn’t a troublesome assignment – particularly if you have a decent chainsaw close by. In any case, on the off chance that you don’t have the roots appropriately exposed, then you’re going to have a difficult time separating the roots from the tree.
You should be wary when cutting through the roots, you’re working right next to the dirt, and if you mistakenly dig the blade of your chainsaw in the dirt, you’ll ruin it with a quickness.
Be sure you get them all of the dirt away from the roots before you start cutting through them.
Stage 5: Pry the Stump Loose
Another highly labor-intensive step in the stump removal process is the last step that requires a lot of work.
After you have the roots separated from the tree stump, take your digging bars (or arranging bars) and begin to work the stump out of the ground. These digging bars go about as levers to help you gradually pry and lift the stump out of it’s resting place. Since the tree has been staying there since its origin, this part won’t be simple. It is downright infuriating. But once you have gotten the stump out of the ground, you are home free.
Stage 6: Disposing of the Stump
It is the natural part. Sure, the tree stump is likely very heavy, but moving it is nothing compared to all the work you had to do to pry from its roots and detach it from the ground altogether. Call someone who can come pick the stump up for you. You can probably even make some killer firewood with a more massive tree stump.
You can get in touch with your city to see if tree stumps are picked up for disposal. Recycling centers will typically take tree stumps off your hands too.
Knowing how to remove tree stumps can add a lot of value to your home, and even better, it adds valuable land for you to use without obstacles.
Tree stumps take up a lot of real estate in your yard and dominate the area, which doesn’t let the grass grow around it. It’s usually infested with weeds and creates an overall dingy look on your lawn.
Imagine all the things you can do once you get rid of that stump. Put down a flower bed, or maybe a garden. You’ll be able to do countless things with this added space; you have to figure the best way to use it.